Nets & MOLLE Panels
The nets and panels are designed to be attached from the bottom and top, using the built in straps. The straps can be attached to fuselage tubes or existing tie-down fittings, by simply wrapping the strap around a fuselage tube (or other attach point) and then attaching the G-hook back onto the net and pulled tight.
The bottom straps are commonly attached to the seat belt fittings (see picture) while the top straps connect to a fuselage tube.
Tip: Fixed anchor straps can be purchased for faster/easier connecting with the G-hooks or carabiners.
Integrated Straps
The integrated attach straps can be configured in several ways. Watch the video for a quick overview of how they were designed to be used.
Caution: make sure the straps do not interfere with any control cables or pulleys.
Anchor Straps & G-hooks
Installing anchor straps is super easy. Just wrap the strap around the fuselage tube (or other attach point) and back through both sides of the slider buckle. Excess strap can be trimmed as needed.
Tip: For added strength, wrap the free end back through the opposite side of the buckle (see picture).
Your net can be connected to the anchor straps via the include G-hook buckle. Simply, slide the g-hook into the loop of the attachment strap and pull the strap tight.
Caution: make sure the straps do not interfere with any control cables or pulleys.
Customer Insallations
